EXBT5 | Premium Bluetooth Receiver
EXBT5 is a premium low energy Bluetooth® music receiver featuring 5.0 Bluetooth® compliance with AptX® codecs for HD sound. Now you can add wireless streaming to your vehicle stereo without the bandwidth compression found in previous generations of receivers. You can instantly hear the difference!
Three easy mounting options: The EXBT5 can mount with screws to a convenient panel, zip ties or the supplied 3M® surface sticker. For best results, choose a vertical surface mounting location 18" from your auxilary input.
Combine the EXBT5 wtih ZLD MKII: The Bluetooth receiver can easily be integrated with most brands of preamp to add premium wireless sound. Plug directly into the L/R auxiliary input of the Exile ZLD unit. Connect receiver power / ground to ZLD [REM / GRND] terminals. You are ready to pair the devices and play music.
Certified Bluetooth® 5.0 specification, A2DP v1.2
50 mA at full output
5.4V rms with source at full volume
|Frequency response:||20hz - 20Khz|
100ft line of site
|Input Data Rate:||
Determined by source
|Power On reconnect:||Yes
A2DP connection to sources
18” molded RCA
18” Fused PWR/GRND
You've Got Questions / We've Got Answers:
Q: My friend has a bluetooth receiver and it works less than ideally. How is the Exile unit different?
A: Performance varies on every device. The cheaper ones on the market tend to have very low output voltage which decreases the overall audio output. Here is a recent sample evaluation testing we did to compare the EXBT5 to the real world competition. The bottom line - The Exile EXBT5 has 2.2V output which is more voltage than most source units. That's premium performance!
Q: In the past I've been told by many people (including Exile staff) that Bluetooth receivers lose dynamic range and will degrade my stereo sound. What has changed? Why is this one better?
A: So true! Up until the introduction of AptX® codecs, the sound quality / audio compression has been greatly impacted on high end stereo systems. The EXBT5 supports aptX, SBC, MP3, AAC and is automaticly determined by input source. The improvement is significant. For Maximum HD sound you need to use a source and reciever that is aptX certified / enabled. These devices will bear the AptX® logo and provide up to 384 kbit/s audio streaming. The EXBT5 is AptX® enabled.
Q: Does it matter where I choose to mount the Exile receiver?
A: The Unit can mount remotely to any panel or surface as described above. What's unique about the EXBT5 is it isn't built into any metal chassis. Products that feature "built-in" receivers decrease their effective streaming range because they are shielded from the paired "line of sight" source device. For maximum effective range, we suggest mounting the EXBT5 in a vertical position no farther than 18 inches from the auxiliary input connection.
Q: Is the EXBT5 waterproof?
A: No, it cannot be submerged. The receiver unit is water resistant from moisture and the outside elements. The chassis is plastic and sealed rubber and conforms to IPS65 standards.
Q: Is the unit difficult to pair? I've got a car with built-in bluetooth and it never works right.
A: The EXBT5 utilizes auto pairing within the 5.0 compliance. It is fast and reliable. Once paired, the streaming device will automatically re-sync after the first use.
Q: What's the difference between bluetooth 4.0 and the new 5.0 standard?
A: The EXBT5 utilizes the 5.0 specification. This is the newest bluetooth specification. It is significant because of the low energy consumption and high bit rate receiving. The EXBT5 draws aproximately 50mA at full output.
- Bluetooth® v5.0 Low Energy + AptX® Codec Enabled- 5.4Vrms Output (better than most source units)- Marine Sealed Unit
EXBT5 Owner's Manual - Coming soon.